|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APT11044B2FLL APT11044LFLL 1100V 26A 0.440 POWER MOS 7 (R) R FREDFET T-MAXTM Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching (R) losses are addressed with Power MOS 7 by significantly lowering RDS(ON) (R) and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg * Increased Power Dissipation * Easier To Drive * Popular T-MAXTM or TO-264 Package * FAST RECOVERY BODY DIODE TO-264 D G S MAXIMUM RATINGS Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25C Pulsed Drain Current 1 All Ratings: TC = 25C unless otherwise specified. APT11044JFLL UNIT Volts Amps 1100 26 104 30 40 694 5.56 -55 to 150 300 26 50 4 Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current 1 Volts Watts W/C C Amps mJ (Repetitive and Non-Repetitive) 1 Repetitive Avalanche Energy Single Pulse Avalanche Energy 3000 STATIC ELECTRICAL CHARACTERISTICS Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) Drain-Source On-State Resistance 2 MIN TYP MAX UNIT Volts 1100 0.440 250 1000 100 3 5 (VGS = 10V, 13A) Ohms A nA Volts 11-2003 050-7177 Rev A Zero Gate Voltage Drain Current (VDS = 1100V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 880V, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com DYNAMIC CHARACTERISTICS Symbol Ciss Coss C rss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Symbol IS ISM VSD dv/ dt APT11044B2FLL - LFLL Test Conditions VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 550V ID = 22A @ 25C RESISTIVE SWITCHING VGS = 15V VDD = 550V ID = 22A @ 25C RG = 0.6 6 INDUCTIVE SWITCHING @ 25C VDD = 733V, VGS = 15V ID = 22A, RG = 5 6 INDUCTIVE SWITCHING @ 125C VDD = 733V VGS = 15V ID = 22A, RG = 5 Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge 3 MIN TYP MAX UNIT pF 5643 828 153 180 32 111 18 9 45 14 961 581 1812 899 MIN TYP MAX Gate-Source Charge Gate-Drain ("Miller ") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage Peak Diode Recovery 1 2 dt nC ns J SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS UNIT Amps Volts V/ns ns 26 104 1.3 10 Tj = 25C Tj = 125C Tj = 25C Tj = 125C Tj = 25C Tj = 125C MIN (Body Diode) (VGS = 0V, IS = -26A) 5 dv/ t rr Reverse Recovery Time (IS = -26A, di/dt = 100A/s) Reverse Recovery Charge (IS = -26A, di/dt = 100A/s) Peak Recovery Current (IS = -26A, di/dt = 100A/s) Characteristic Junction to Case Junction to Ambient 320 650 3.60 9.72 16.5 24.7 TYP MAX Q rr IRRM C Amps THERMAL CHARACTERISTICS Symbol RJC RJA UNIT C/W 0.18 40 1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471 0.20 , THERMAL IMPEDANCE (C/W) 4 Starting Tj = +25C, L = 8.88mH, RG = 25, Peak IL = 26A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS -26A di/dt 700A/s VR 1100 TJ 150C 6 Eon includes diode reverse recovery. See figures 18, 20. APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.16 0.7 0.12 0.5 0.08 0.3 0.04 0.1 0 0.05 10-5 10-4 10-3 10-2 SINGLE PULSE Note: PDM t1 t2 Duty Factor D = t1/t2 Peak TJ = PDM x ZJC + TC 11-2003 050-7177 Rev A Z JC 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 1.0 Typical Performance Curves 50 ID, DRAIN CURRENT (AMPERES) Junction temp. (C) RC MODEL APT11044B2FLL - LFLL 45 40 35 30 25 20 15 10 5 0 5.5V 5V 6V VGS =15 & 10V 6.5V 7V 0.0271 0.00899F Power (watts) 0.0656 0.0202F 0.0859 Case temperature. (C) 0.293F FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL 70 ID, DRAIN CURRENT (AMPERES) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE VDS> ID (ON) x RDS (ON)MAX. 250 SEC. PULSE TEST @ <0.5 % DUTY CYCLE 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.40 NORMALIZED TO V = 10V @ 13A GS 60 50 40 30 1.30 VGS=10V 1.20 TJ = -55C 1.10 TJ = +25C 20 10 0 TJ = +125C 1.00 VGS=20V 0.90 0.80 0 1 2 3 4 5 6 7 8 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS 0 10 20 30 40 50 60 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT 30 25 20 15 10 BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED) I V D 1.15 ID, DRAIN CURRENT (AMPERES) 1.10 1.05 1.00 5 0 25 0.95 0.90 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -50 11-2003 050-7177 Rev A 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED) 3 = 13A = 10V 2.0 1.5 1.0 0.5 0 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, ON-RESISTANCE vs. TEMPERATURE VGS(TH), THRESHOLD VOLTAGE (NORMALIZED) 2.5 GS -25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE APT11044B2FLL - LFLL 104 ID, DRAIN CURRENT (AMPERES) OPERATION HERE LIMITED BY RDS (ON) 20,000 10,000 Ciss C, CAPACITANCE (pF) 50 10 5 100S 1,000 Coss TC =+25C TJ =+150C SINGLE PULSE 1 10 100 1100 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA 16 I D 1mS Crss 0 10 20 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE 200 100 100 1 10mS = 22A 12 VDS= 220V IDR, REVERSE DRAIN CURRENT (AMPERES) VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) TJ =+150C TJ =+25C 10 8 VDS= 550V VDS= 880V 4 50 100 150 200 250 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE 300 250 td(on) and td(off) (ns) 0 0 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE 90 1 td(off) 80 70 V DD G = 733V 200 V DD G = 733V 60 tr and tf (ns) R = 5 tf R = 5 T = 125C 150 100 50 T = 125C J 50 40 30 20 J L = 100H L = 100H tr td(on) 0 0 15 20 25 30 35 ID (A) FIGURE 14, DELAY TIMES vs CURRENT V DD G 10 0 15 20 25 30 35 ID (A) FIGURE 15, RISE AND FALL TIMES vs CURRENT 6000 V I DD 5 10 0 5 10 3000 2500 SWITCHING ENERGY (J) = 733V = 733V R = 5 D J = 22A T = 125C J 5000 SWITCHING ENERGY (J) T = 125C L = 100H EON includes diode reverse recovery. L = 100H Eoff 2000 1500 E ON includes diode reverse recovery. 4000 3000 Eon 1000 500 0 15 20 25 30 35 ID (A) FIGURE 16, SWITCHING ENERGY vs CURRENT 0 5 10 Eoff 11-2003 2000 1000 0 Eon 050-7177 Rev A 10 15 20 25 30 35 40 45 50 RG, GATE RESISTANCE (Ohms) FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE 0 5 Typical Performance Curves APT11044B2FLL - LFLL 10 % Gate Voltage T = 125 C J 90% td(off) 90% Gate Voltage T = 125 C J td(on) Drain Voltage tr 90% Drain Current t f 10% 0 Switching Energy Drain Current 5% Switching Energy 10 % 5% Drain Voltage Figure 18, Turn-on Switching Waveforms and Definitions Figure 19, Turn-off Switching Waveforms and Definitions APT30DF120 V DD IC V CE G D.U.T. Figure 20, Inductive Switching Test Circuit T-MAXTM (B2) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) TO-264 (L) Package Outline 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.79 (.228) 6.20 (.244) Drain 20.80 (.819) 21.46 (.845) Drain 25.48 (1.003) 26.49 (1.043) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 2.29 (.090) 2.69 (.106) 19.81 (.780) 21.39 (.842) 2.29 (.090) 2.69 (.106) 1.01 (.040) 1.40 (.055) Gate Drain Source 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 050-7177 Rev A 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 11-2003 19.81 (.780) 20.32 (.800) Gate Drain Source |
Price & Availability of APT11044B2FLL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |